Question:
Unit III Essay Worksite Hazard Assessment OSHA’s Personal Protective Equipment Standard requires employers to assess the workplace to determine if hazards are present that necessitate the use of PPE. Based on the assessment, appropriate PPE must be selected and provided to affected employees. Using Subpart I Appendix B as a guide, develop a hazard assessment for your workplace or a workplace you are familiar with. If you work in an office or other non-hazardous location, develop an assessment for an imagined industrial shop, such as woodworking or metalworking. Use the other sections of Subpart I to help determine the appropriate PPE for each hazard. If you work in an office or somewhere else that isn’t dangerous, make a risk assessment for a woodworking or metalworking shop. Use the other parts of Subpart I to help you figure out what PPE you need for each hazard. You can also use online safety equipment catalogs to find examples of PPE that meets the OSHA requirements. Your submission must be a minimum of two pages. References and citations in APA format should be provided to support the hazard determinations and PPE selection. The reference page does not count towards the two page minimum. Subpart I Appendix B is located at the following link: http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10120 Information about accessing the Blackboard Grading Rubric for this assignment is provided below.
Strengthening Legal Frameworks for Prosecuting Piracy and Related Offenses in the Arabian Sea and Red Sea
Strengthening legal frameworks for prosecuting piracy and related offenses in the Arabian Sea and Red Sea. Piracy in the Arabian Sea and Red Sea poses significant threats to international maritime security and trade. This paper examines the effectiveness of current legal frameworks in prosecuting piracy and related offenses in these regions. By analyzing international conventions, […]
