A pump station installation at Corona consists of two pumps configured in series each developing 1500 ft of head at 4000 gal/min.
A pump station installation at Corona consists of two pumps configured in series each developing 1500 ft of head at 4000 gal/min.
A pump station installation at Corona consists of two pumps configured in series each developing 1500 ft of head at 4000 gal/min. Diesel fuel (Spgr=0.85, and viscosity=5.9 cSt) is pumped from Corona to a delivery terminal at Sunnymead, 75 miles away. The required discharge pressure at Corona based on pipe size, pipe length, liquid properties, elevation profile between Corona and Sunnymead, and the required delivery pressure at Sunnymead has been calculated to be 1050 psi. The pump station suction pressure is maintained at 50 psi to prevent pump cavitation. Assume the combined efficiency of both pumps at Corona at the given flow rate to be 82%.
(a) Analyze the pump station pressures and determine the amount of throttle pressure and HP wasted.
(b) If electrical energy costs 8 cents per kWh, estimate the dollars lost in control valve throttling.
(c) What recommendation can you make to improve pipeline operation?
—
A pump station installation at Corona consists of two series-connected pumps, each producing 1500 ft of head at 4000 gal/min.
A pump station installation at Corona consists of two series-connected pumps, each producing 1500 ft of head at 4000 gal/min.
A pump station installation at Corona consists of two series-connected pumps, each producing 1500 ft of head at 4000 gal/min. Corona’s diesel fuel (Spgr=0.85, viscosity=5.9 cSt) is piped 75 kilometers to a distribution port in Sunnymead. The needed discharge pressure at Corona has been calculated to be 1050 psi based on pipe size, pipe length, liquid characteristics, the elevation profile between Corona and Sunnymead, and the required delivery pressure at Sunnymead. The suction pressure at the pump station is
