Order custom papers, masters thesis and dissertation in 3 guided steps; human written!
Posted: February 26th, 2022
Module 9: Practical Distributed Control Systems
Written Assessment
Total Marks: 97 marks
Assessment Points:
• Supply the required answers below in a blue font (not red or black).
• You must submit this assessment along with the practical component.
• Answer all the questions.
Module 9 Critical Questions:
• Question 1 & Question 20.
• These questions are mandatory to assess Module competency.
• Questions must be answered completely correctly to be assessed as competent with a score for this module.
Que 1: Explain the differences between DCS and SCADA systems.
Note – This question is mandatory. It should be answered and students are expected to get this question completely right to be assessed as competent with a score for this module.
Ans1:
Q2: Name the five (5) essential levels of SCADA systems.
A2:
Q3: Explain the meaning of smart instruments in a DCS system. And give a simple diagram where smart instruments are used to a computer based system using PLC and digital data communications.
A3:
Q4: What are the requirements of the operator interface within the DCS?
A4:
Q5: What should be done when the DCS operator wants to see data? How a field communications failure is handled in a SCADA system?
A5:
Q6: Draw a typical layout of the data communications paths in a DCS system, where a number of PLC’s collect the data from field devices and share that data with operator stations via LAN.
A6:
Q7: Discuss the importance of “redundancy” in a DCS system.
Hint: Think about sharing data between SCADA and DCS
A7:
Q8: Briefly describe and give a simple diagram for a cold standby SCADA system.
A8:
Q9: Compare the functions of DCS and PLC in a SCADA system.
A9:
Q10: Explain the main differences between DCS and PLC/SCADA systems.
A10:
Q11: What are the advantages of “STAR” and “RING” topologies?
A11:
Q12: Explain how digital inputs are used in a SCADA system and what applications they normally perform.
A12:
Q13: Briefly describe the function of “Packet Switching Systems”?
A13:
Q14: Explain how industrial Ethernet can be incorporated in DCS systems.
A14:
Q15: Explain the “Bastion” model of security.
A15:
Q16: What are the five (5) important industrial network security issues?
A16:
Q17: Briefly describe “Polled” communication philosophy.
A17:
Q18: How can we efficiently avoid collisions in a “CSMA/CD” communication technique?
A18:
Q19: What are the functions of the DCS central processing unit. Also, include in your answer a simple diagram for a “Control Program” which is used as a loop (or iteration).
A19:
Q20: Describe discrete & logic control. What is a “Ladder Logic Diagram”?
Note – This question is mandatory. It should be answered and students are expected to get this question completely right to be assessed as competent with a score for this module.
A20:
Q21: What is meant by sequential & batch control?
A21:
Q22: Sketch a simple diagram showing the algorithm for a continuous control system which uses PID controllers.
A22:
Q23: Discuss in detail your understanding about a PID control algorithm and its components.
Include in your answer a simple diagram including set point processing, output processing, operator, and processor.
A23:
Q24: Briefly explain the meaning of “tagged slot”, and give at least five (5) examples of data points.
A24:
Q25: What is meant by “Timer Point” in a DCS system? What does it do?
A25:
Q26: What are the six (6) basic network security measures?
A26:
Q27: What is the main disadvantage of traditional firewalls?
A27:
Q28: Define what is meant by a “trend window”? What are the functions?
A28:
Q29: What are the three (3) main types of HMI screens?
A29:
Q30: Discuss human and ergonomic factors in alarm systems. Include in your answer a simple figure showing correct position of the operator to the system.
A30:
Q31: Ergonomic design and studies should ensure that important environmental parameters are appropriate to the requirements of the human operator.
Name at least five (5) such parameters.
A31:
Q32: An alarm system can assist the human operator in some areas.
Name at least four (4) such important areas.
A32:
Q33: By means of a simple diagram, show typical operator activities during an abnormal condition of the plant.
A33:
Q34: Explain the concept of Safety Integrity Level (SIL).
Give a typical and simple diagram for “Discrete Safety Integrity Levels” vs PFD avg.
A34:
Q35: Explain in detail the meaning of SIL2 category of safety integrity.
A35:
Q36: Name the activities involved in designing of an alarm system.
A36:
Q37: Explain how alarms are prioritized. Name at least two (2) factors.
A37:
Q38: What are the benefits of “logging repeating alarms?
A38:
Q39: In regard to alarm reporting, describe the four (4) features of “alarm annunciator display?
A39:
Q40: In regard to maintenance, explain your understanding of dependability of a DCS system?
A40:
Q41: What are the two basic requirements in terms of DCS in-built diagnostics?
A41:
Q42: Explain in detail the self-diagnosis concepts of a DCS system?
A42:
Q43: Discuss in detail the three (3) reasons why UPS’s are essential for DCS control systems.
A43:
Q44: What actions does the “gateway interfacing module”, “controllers” and “history storage module” perform in the recovery of a DCS system?
A44:
Q45: a) From the table below prepare an alarm tag list with appropriate tag names and classify each tag as an important (i.e. actionable) or warning alarm. (10 marks)
Tag Name Description Range Units U_Limit L_Limit
AI-1000 Limestone crusher D.E. Opacity Monitor 0-50 ug/m3 35 0
AI-1100 Screen House D.E. Opacity Monitor 0-50 ug/m3 35 0
TIC-2000 Mill Inlet Temperature 0-120 Deg C 100 60
PDC-2000 Mill Differential Pressure 0-400 mm Wg 275 125
TIC-2010 Mill Outlet Temperature 0-150 Deg C 120 80
WC-2000 Mill Raw Material Feed / flow rate 0-225 tph 220 180
WIC-2010 High Grade Limestone Feed / flow rate 0-50 tph 45 0
WIC-2020 Feedable Grade Limeston Feed/Flow rate 0-180 tph 170 0
WIC-2030 Low Grade Limestone Feed / flow rate 0-50 tph 40 0
WIC-2040 Additives Feed/flow rate 0-20 tph 18 0
b) Explain the reason(s) for classifying the alarms as either important or warning. (10 marks)
c) Tag WC-2000 is the sum of the total feed / flow to the mill. Explain what tags are used to calculate this tag and how the calculation would be done using Function Block Diagram language. (10 marks).
A45:
Q46: Design an Effective Alarm Management system using MATLAB simulink for the following data.
Consider a Cement Grinding Ball Mill Bearings Lubrication System (as shown in fig) consists of an oil reservoir, two pumps – either of them supplies (other remains as stand-by) lubrication oil to the Ball Mill inlet and outlet bearings.
Sl.no. FAULTS
1 Pump-1 failure
2 Pump-1 power supply failure
3 Pump-1 oil filter Diff.Pressure High
4 Pump-2 failure
5 Pump-2 power supply failure
6 Pump-2 oil filter Diff.Pressure High
7 Inlet Bearing Oil Flow Low
8 Outlet Bearing Oil Flow Low
9 Lub. Oil reservoir Temperature High
10 Reservoir Lub. Oil Level Low
Design a simple and effective alarm management system for the above faults using MATLAB. For every fault condition, identify the alarm and also display corrective actions. 1or 0 can be used as input parameter to trigger certain faults like pump 1 failure… etc. Assume some fault conditions.
Provide Snapshots for before and after alarm trigger by running the MATLAB file.
PLEASE UPLOAD SIMULINK FILE.
Sample:
A46:
Please Provide IEEE references:
We handpick every writer with care, ensuring they bring the perfect mix of academic qualifications and writing skills for top-notch results in essays, research papers, and dissertation help. Each one has a university degree, more than a third with Masters certification; they’ve tackled tough tests and training to excel in thesis writing and research paper assignments at any time. They’ll team up with you diligently, keeping things easy and stress-free as they relate to being immediate students. That’s what makes us the best assignment help website for "help me write my essay, research paper, or dissertation" for college coursework. Trust our team—professional research essay writers and editors—to deliver your dissertation or thesis writing within your grading criteria and deadline.
---------
Module 9: Distributed Control Systems in Action
Written Evaluation
Total Marks: 97 points
Points for evaluation:
• Fill in the blanks in blue font with the required answers (not red or black).
No matter what citation style you need for your research paper or dissertation, our skilled writers have you covered! We provide thesis writing and dissertation help in formats like APA, AMA, MLA, Turabian, Harvard, IEEE, and more. We’re dedicated to customizing your order to the exact guidelines of your chosen style, ensuring it fits your unique academic needs—whether it’s a dissertation, research paper, or essay for a specific course. We’ve got the flexibility to make it work for you!
• This assessment, along with the practical component, must be submitted.
• Respond to all of the questions.
You can absolutely reach out to your academic writer using our simple, user-friendly chat feature. It’s there so you can add details, clarify instructions, or tweak adjustments for editing your research paper or dissertation according to your grading rubric—even after you’ve submitted "help me with thesis writing or dissertation help" and they’ve started working on your project.
Critical Questions for Module 9:
• Questions 1 and 20.
• These questions must be answered in order to determine Module competency.
• To receive a score for this module, you must answer all of the questions entirely properly.
Question 1: Explain the distinctions between DCS and SCADA systems.
Note – This question is mandatory. It should be answered and students are expected to get this question completely right to be assessed as competent with a score for this module.
Ans1:
Q2: Name the five (5) essential levels of SCADA systems
You Want Quality and That’s What We Deliver
We’ve put together our writing team with care, choosing talented writers who shine in their fields. Each one goes through a tough selection process, where we look for folks with deep expertise in specific subjects and a solid history of academic writing. They bring their own mix of know-how and flair to the table, making sure our content hits the mark—packed with info, easy to read, and perfect for college students like you.
We don’t do AI-written essays or copycat work—everything’s original. Competitive pricing is a big deal for us; we keep costs fair while delivering top-notch quality. Our writers are some of the best out there, and we charge rates that stack up well against other services. This means you get stellar content without draining your wallet. Our pricing is straightforward and honest, built to give you real value for your money. That’s why students turn to us for high-quality writing services that won’t break the bank.
Academic integrity is at the heart of what we do. Every paper starts from scratch, with original research and writing tailored just for you. We write 100% authentic—no plagiarism research essays. Our strict quality control process includes scanning every draft with top tools like SafeAssign and Turnitin, so you get a similarity score and proof of originality. We’re obsessive about proper citation and referencing too, crediting every source to keep things legit. It’s all about giving you peace of mind with content that meets the highest standards.
When you decide to place an order with Dissertation Writer, here is what happens: